Hot Flash Causes and Treatments. Plethora has also made a deal with https://newzealandrx.co.nz/buy-amoxil-new-zealand.html a company called Recordati to distribute it in Europe, Russia and some other regions.
UL listed: suitable for wet locations.
UL 1598 & CSA C22.2 No.250.0-08
|DLC listed: eligible for rebates from dlc member utilities.|
|IK10: IEC 62262-2002||IESNA LM-79 & LM-80 Test Report|
|TM21: IES TM-21-11
According to TM-21-11, the rated lumen maintenance of product may 96.71% at
50000 hours. L70 hours is 50000h.
AfPS GS 2014:01 Par.3.1
IEC 60598-2-3 2002+A1
IP65 test according to Clause 9.2.25, Clause 9.2.7 of
IEC 62321-5:2013 Ed.1.0
IEC 62321-4:2013 Ed.1.0
IEC 62321-7-1:2015 Ed.1.0
IEC 62321 2008 Ed.1 Annex C
IEC 62321-6:2015 Ed.1.0
IEC 62321-6:2015 Ed.1.0
|Constant Current,120-277VAC(up to 305VAC)||Three in one dimming function: 1-10Vdc or PWM signal or resistance|
|Built-in active PFC function
Protections: Short circuit/Over current/Over voltage/Over temperature
|Photocell: Twist-lock/Plug-in Locking Type Controls|
|THD< 20% at 120VAC/277VAC
Application: high/low bay lighting.Like warehouse,indoor and outdoor sports stadium,high mast aplication,tunnel and many more.
Housing: Pure Aluminum for maximum heat transfer.
Anti-salty spray: Grade A
Mounting: Ceiling hanging,wall mount and surface mount
Diversified installation methods, can be installed easily and conveniently.
Finished: Corrosion resistant
3 kinds of sensor for optional:
• Light Sensor(Photocell), UL listed photocell, strong resistance to surge current.
• On/off Motion Sensor, hold time 5s to 30min, mounting height 15m max. Detection sensitivity: 25% / 50% / 75% / 100%.
• Dimmable Motion Sensor, hold time 5s to 30min, mounting height 15m max. Detection sensitivity: 50% / 100%.Stand-by period: 0s /10s /1min /5min /10min /30min /1h/+∞. that can be user defined ,Stand-by dimming level: 10% /30%.
LUMILEDS LUXEON 3030 2D
LUXEON 3030 2D is the first color targets mid-power LED. Hot-color targeting ensures that the LEDs are within color target at application conditions–85℃.Using an industry standard packaging of 3.0mm*3.0mm*0.5mm and 6V surface-mount emitter solution,LUXEON 3030 2D comes in all ANSI CCTs and delivers the efficacy and reliabilityrequired for indoor illumination markets.
The iU series has 3 main lens options:the 60degree,90degree and 120 degree.90degree lens is the most common one,suitable for tunnel lighting and many areas like warehouse,court yard,etc.
|LED Distribution Type:|
|60° The Type is suitable for the large area with more than 12 meters installation height.|
|90° The Type lens is suitable for tunnel lighting and many area like warehouse,court yard.|
|120° The Type brings the best evenness.|
|We will make simulation lighting for your specific projects to provide you the best lighting solutions.|
|5 years warranty – Entire luminaire.
1.This warranty term starts since the date of purchase. And the date on the commerical invoice is taken as final;
|3.During the warranty term period, if the luminaire has failed, AOK is responsible to repair the luminaire and rehab its function;|
|2.This Guarantee is limited to common use: any damage caused by man-made (such as the user dismantles products, inappropriate use, inputs improper power and doesn’t use the products according to the instruction, etc), the damage caused during the transportation or caused by any other suddenness, natural disaster, or maintains and refits the products not approved by us. This warranty term will not cover all above conditions of inappropriate use;||4.If the damage is caused by below factors, AOK has the right to charge maintenance cost: 1) The luminaire is out of validity date of guarantee. 2) The damage due to force majeure (such as flood, fire, earthquake, lightning strike, typhoon, etc) or using the products inappropriately. 3) the structure or circuitry of the luminaire amended by the users or third party.|